Power
Saver™ Program
Power Partner Thermostats—Details
How it Works
Austin Energy provides you with a free programmable thermostat plus free installation and warranty—valued between $200 and $280. In return, you allow us to cycle off your air conditioner briefly during peak demand—when demand for electricity is highest.
Cycling Off During Peak Demand
Periods
Cycling off only occurs the few days
each summer when the demand for electricity and our load
are the highest. A radio-controlled
switch on the thermostat cycles off your air conditioner compressor
when it receives a signal from Austin Energy.
Cycling off is not noticeable. The purpose of cycling
is to synchronize air conditioners so they take turns cycling
on. This keeps the electric demand level.
Cycling Off Timeline
(only occurs when demand and load are highest) |
| June thru September |
| 3:00 p.m. to 7:00 p.m. |
| Excludes Holidays and Weekends |
| Happens for No More than 10 Minutes Every Half Hour |
| |
Benefits of Participation
 |
Free air conditioning check to determine compatibility with this
type of programmable thermostat—includes a visual inspection
of your air conditioner |
 |
Free programmable thermostat—set it by hand or program it anywhere, anytime you have Internet access |
 |
Free customer service support every day, 24 hours a day; free repair or replacement of your thermostat as long as you are a Power Partner |
 |
Depending on thermostat settings, most customers save 10% to 20% on their energy bill year-round with a programmable thermostat |
 |
Year-round comfort—arrive at an already cooled or heated building |
 |
A protective time delay to allow coolant to reset before equipment powers back up after a cycling session or a power outage |
 |
Risk-free, satisfaction guaranteed participation—if you are ever dissatisfied, we will
remove the Power Partner Thermostat and reinstall your old thermostat
at no charge |
 |
Standardize all your thermostats |
 |
Lock boxes at no cost for businesses if requested prior to
thermostat installation |
Eligibility
Any Austin Energy residential or commercial electric customer
with standard-type air conditioners—split systems, package
units, or heat pumps—may apply.
The heater component may be either gas or electric.
Leased
residential facilities require a
Rental Release Form (pdf)
signed by the owner/agent.
Power
Saver™ Program—Saving Energy Together |